INSTALLATION AND OPERATION INSTRUCTIONS — FENCE PROTECTION SYSTEMS
12
The ultimate goal of the fence protection system is reliable detection of cutting and/or climbing with
minimum nuisance alarms. Since the FPS sensor system is mounted to the fence fabric, care must be
taken when installing and maintaining the fence. A fence installed to normal professional standards
will provide an acceptable basis for the FPS system. However, a fence improperly installed and/or
missing tie wires and clamps can cause nuisance alarms.
Figure 11. Alarm Zone Connections
FPS-3
DUAL ZONE
PRE-AMP.
END OF LINE
TERMINATION**
LEFT ZONE
RIGHT ZONE
EARTH GROUND
WIRING TO FPS-3
CENTRAL CONTROLLER
END OF LINE
TERMINATION**
SENSITIVE
TRANSDUCER
CABLE
SENSITIVE
TRANSDUCER
CABLE
** Double runs of sensor cable
return to termination located
inside dual zone pre-amp.
