manualshive.com logo in svg

SENSTAR FiberPatrol FP400, Product Manual, Page: 73 / 76

Share
Download
SENSTAR FiberPatrol FP400 Product Manual Download Page 73

FP400 Product Guide

Page 73

a System component list

Component

Part Number

Description

FP400 processor 

F4EM0100

Senstar FP400 panel mount processor in painted aluminum shell 
for fence protection applications with 4 independent alarm zones 

EIA-19 in. rack-mount kit

F4KT0500

Components required to rack-mount the Senstar FP400 in an 
EIA-19 in. equipment rack (1 RU) 

DIN rail mount kit

F4KT0600

Components required to mount the Senstar FP400 on a 35 mm DIN 
rail 

Zone connection kit

F4KT0200

Includes the components to connect one sensor zone (start 
module, end module) (splice enclosure’s ordered separately)

splice enclosure

F4KT0100

compact outdoor rated STP 2-port splice enclosure can 
accommodate 12 fusion splices

high capacity splice 
enclosure

GM0749-24

3-port splice enclosure can accommodate up to 24 fusion splices

single-mode fiber optic 
cable

F4SP0100

250 m (820 ft) single-mode fiber optic lead-in cable/sensor cable for 
fence applications (12 fibers) 8.6 kg (19.0 lb) 29 cm h x 29 cm 
diameter (11.5 in. h x 11.5 in. diameter)

single-mode fiber optic 
cable

F4SP0101

1000 m (3280 ft) single-mode fiber optic lead-in cable/sensor cable 
for fence applications (12 fibers) 30.8 kg (67.8 lb) 42 cm h x 37 cm 
diameter (16.5 in. h x 14.75 in. diameter)

bypass conduit

GW0328-ORN

orange solid wall conduit for buried cable bypasses

bypass conduit

GW0328-BLK

black solid wall conduit for buried cable bypasses

conduit coupler

GW0328-COU

coupler for joining 2 lengths of solid wall conduit

cable ties, nylon-12

GH1210-1000

Bag of 1,000 long lasting UV resistant cable ties

Senstar connector 
cleaning tool kit

GX0313

fiber technician connector cleaning kit for Senstar applications

Senstar installation tool kit GX0314-04

fiber technician tool kit customized for Senstar applications

splice consumables kit

FPKT0200

components required to make up to 24 fusion splices

Option card installation kit F4KT0300

hardware kit required to mount any optional add-on card on the 
FP400 processor 

Gate accessories

wireless gate sensor 
processor (GSP) and 
enclosure

E7EM0300

wireless gate sensor processor mounted in an outdoor rated 
painted aluminum enclosure, provides electronic processing for up 
to 4 GSMs

wireless gate sensor 
module (GSM)

E7EM0201

battery powered wireless gate sensor module mounts on gate and 
communicates via RF with plug-in module on FP400 processor

Summary of Contents for FiberPatrol FP400













































































Reviews:

No comments