31
Using the products
Level 1
Level 2
To ...
See …
Audio
Settings
Low Cut
filter out low-frequency noise
page 32
Equalizer
select a sound profile or manually
adjust the equalizer
page 32
De-Esser
attenuate sibilants
page 33
Auto Gain
Control
activate/deactivate the dynamic com-
pression
page 33
Effects Reset
reset all audio settings to the factory
default settings
page 33
Audio Level
fine-tune the receiver‘s output level
page 34
Output Type
adjust the receiver‘s output level to
match the input (mic or line) of the
connected device
page 34
Exit
exit Level 2 and return to Level 1
System
Settings
Auto Lock
activate/deactivate the automatic lock
mode
page 34
Mute Switch
activates/deactivate the transmitter‘s
MUTE switch
page 35
Display
Brightness
change the brightness of the display
panel
page 35
Help
display the QR codes for the help
functions
page 35
System Info
display the firmware version and serial
number
page 36
Factory Reset
reset the receiver to the factory default
settings
page 36
Exit
exit Level 2 and return to Level 1
Network
Settings
Mode
change the IP address assignment
mode
page 36
IP
change the IP address
page 36
Subnet
change the subnet mask
page 36
Gateway
change the gateway address
page 37
IPv6
display the IPv6 address
page 37
MAC
display the MAC address
page 37
Exit
exit Level 2 and return to Level 1
Name
–
change the name of the radio link
page 32
Walk
Test
–
check the reception quality within the
operating environment
page 37
Exit
–
exit the operating menu and return to
the standard display
Summary of Contents for evolution D1
Page 1: ...System Manual ...
Page 2: ...2 ...