34
Using the products
Coarsely adjusting the output level of the receiver (Mic/Line)
You can coarsely adjust the output level of the receiver to match the input
(mic or line) of the connected mixing console.
왘
Select
Audio Settings
–
Output Type
.
Fine-tuning the output level of the receiver
You can fine-tune the output level of the receiver to match the input (mic or
line) of the connected mixing console.
왘
Select
Audio Settings
–
Audio Level
.
왘
Turn the jog dial to increase or reduce the audio level.
Turning the jog dial by one notch increases or reduces the audio level by
1 dB. You can adjust the audio level between 0 dB and 30 dB.
Activating/deactivating the lock mode
The receiver is delivered with the lock mode deactivated. This is indicated by
the open padlock icon on the standard display as shown on the left.
To activate the lock mode:
왘
Select
System Settings
–
Auto Lock
–
On
.
Stored
appears on the display panel. The open padlock icon
appears
on the standard display for 10 seconds. If, during these 10 seconds, no but-
ton is actuated on the receiver, the lock mode is activated and the locked
padlock icon
appears on the standard display.
The lock mode prevents that the receiver is accidentally switched off or that
settings are inadvertently changed during operation. If one of the receiver
buttons is actuated while the lock mode is activated,
Locked
and
To
unlock press & hold SET
appears on the display panel of the receiver.
To temporarily deactivate the lock mode:
왘
Long-press the jog dial.
Unlocked
appears on the display panel.
The open padlock icon
appears on the standard display and the lock
mode is deactivated for 10 seconds. If, during these 10 seconds, no button
is actuated on the receiver, the lock mode is automatically activated again.
To permanently deactivate the lock mode:
왘
If the lock mode is temporarily deactivated, select
System Settings
–
Auto
Lock
–
Off
.
Stored
appears on the display panel. The lock mode icon no longer
appears on the standard display.
Exit
Effects Reset
Audio Level
Output Type
Low Cut
10 dB
Line
Off
Audio
Setting
Meaning
Line
The output level is adjusted to match a line input.
Mic
The output level is adjusted to match a mic input.
Exit
Auto Gain Control
Effects Reset
Audio Level
Output Type
Off
10 dB
Line
Audio
NAME
EQ DE-S AGC
10 h
Auto Lock
Mute Switch
Display Brightness
Off
Active
75
Debug Mode
System
Exit
Summary of Contents for evolution D1
Page 1: ...System Manual ...
Page 2: ...2 ...
