background image

38 

Using the products

Controlling, monitoring or updating devices via the 
network

You can control, monitor and update multiple receivers and their paired trans-
mitters via the network.

“WSR” app

Together with the “Wireless System Remote” (WSR) app, you can use one or
several mobile devices to remotely configure all receivers and transmitters of
a multi-channel system, to monitor their operation, or to update the firmware
of the devices.

“Sennheiser D1 SL Updater” software

You can use the “Sennheiser D1 SL Updater” software to update the firmware.

Monitoring devices using the “WSR” app

The free “Wireless System Remote” (WSR) app is available in the Apple App

 

Store

Compatible mobile devices and operating systems:

• Apple iPad 2, iPad Air, iPad Air 2, iPad mini, iPad mini 2 or iPad mini 3 Apple

iPhone 4, 4S, 5, 5S, 5C, 6, 6 Plus with iOS

 

6 or higher

To control, monitor and update your receivers and transmitters using mobile
devices:

Connect all receivers to a WiFi router as described on page 20.

. . . 

2.4 GHz or 

5 GHz 

(recommended)

Network connection 

via a router or switch

Wireless System 

Remote (WSR)

Sennheiser 

D1 SL Updater

Devices with old hardware may not offer a smooth and fast user
experience due to their limited processing power.

Summary of Contents for evolution D1





























































Reviews: