Sennheiser evolution D1, System Manual

Page: 38 / 60

36
Using the products
왘
Use a QR scanner (e.g. your smartphone or a reading device for QR codes)
to scan the QR code that appears on the receiver display panel or follow the
given link in your browser.
Alternatively, you can click on the desired link in the above table.
Retrieving system information
You can display the serial number and the current firmware version of the
receiver.
왘
Select System Settings – System Info .
The serial number as well as the version number and the date of the current
firmware are displayed.
왘
Press the ESC button to return to the operating menu.
Resetting the receiver to the factory default settings
The System Settings – Factory Reset menu item allows you to reset the
receiver to its factory default settings.
After the reset, the receiver is restarted and the standard display is shown on
the display panel.
Changing the network configuration
Changing the IP address assignment
mode
You can choose between static and dynamic IP address assignment.
왘
Select Network Settings – Mode .
Changing the IP address You can change the IP address of the receiver. The new IP address becomes
effective only if
Fixed IP has been selected in the Mode menu item.
왘
Select Network Settings – IP .
왘
Enter the IP address.
왘
Select Save and confirm by pressing the jog dial.
Changing the subnet mask You can change the subnet mask of the receiver.
왘
Select Network Settings – Subnet .
왘
Enter the subnet mask.
왘
Select Save and confirm by pressing the jog dial.
Exit
Display Brightness
Help
System Info
Factory Reset
75
System
Exit
Help
System Info
Factory Reset
System
If you change a setting in the Mode , IP , Subnet and Gateway sub-
menus of the Network Settings menu, you will be prompted to restart
the receiver.
왘
Switch the receiver off and on again so that changes to the network
configuration take effect.
Mode
IP
Subnet
Fixed IP
0.0.0.0.
0 0 0 0
MAC 00:1B:66:7D:56:D3
Network
Exit
Setting Meaning
Fixed IP The receiver is assigned a static IP address. You can enter the
static IP address via the
IP menu item.
Automatic When switched on, the receiver is automatically assigned a
dynamic IP address.
Exit
Mode
IP
Subnet
Gateway
Fixed IP
0.0.0.0.
0.0.0.0.
0 0 0 0
Network
Mode
IP
Subnet
Gateway
IPv6 1188:80F3:1388:
Fixed IP
0.0.0.0.
0.0.0.0.
0.0.0.0.
Network