![background image](http://html1.mh-extra.com/html/sennheiser/evolution-d1/evolution-d1_system-manual_1241731021.webp)
19
Putting the products into operation
Mounting the rod antennas to the front of the rack
When mounting only one receiver into a rack, you can mount the receiver‘s
antenna connections to the front of the rack. This can improve reception.
왘
Screw the two R-SMA sockets
6
of the R-SMA extension cables to the
blanking plate
2
using the supplied washers and nuts.
왘
Connect the two R-SMA connectors
5
to the R-SMA sockets of the receiver.
왘
Slide the receiver into the 19" rack.
왘
Secure the rack mount “ears” to the rack.
왘
Connect the two 2G4 rod antennas to the R-SMA sockets
6
of the blanking
plate
2
.
Mounting two receivers into a rack
You can mount two receivers side by side into a rack.
왘
Place the two receivers side by side upside-down onto a flat surface.
왘
Align the jointing plate
3
over the holes in the bottom sides of the receiv-
ers.
The jointing plate must be placed centrally over the two receivers.
왘
Secure the jointing plate
3
to the receivers using the six recessed head
screws
9
.
6
5
Summary of Contents for evolution D1
Page 1: ...System Manual ...
Page 2: ...2 ...