SENKO fireplaces
–
Instruction manual
4
1. GENERAL
Solid fuel central heating fireplaces with glass door
E2284 Central 20-25 kW
E2285 Central 30-35 kW
are models from the SENKO fireplaces palette which can accommodate
your needs in the best possible way. Therefore, we ask you to CAREFULLY
READ THESE INSTRUCTIONS, which will help you to achieve the best
possible results already during the initial use.
The manufacturer is not responsible for any
consequences
(people
or animal injuries or property damages)
resulting from failure to comply
with this
Manual
.
The fireplace is hot during operation and
the use of
protective heat insulated gloves is compulsory during handling
.
Children and infirm individuals are not allowed to handle the fireplace.
The external appearance of the fireplace is shown on the first page of
this Manual. Fireplace principal parts are made of qualitative boiler sheets
and castings of quality grey cast. The fireplaces are produced with flue gas
connection point in the middle of the dome facing up.
When ordering the
fireplace or the spare parts, it is necessary to state its full designation
,
for example: fireplace E2284 Central 20-25 kW. The fireplaces are
manufactured and certified in accordance with the EN 13229 standard and
comply with all the requirements set by this standard
SENKO fireplaces are intended
for space heating and central
heating
!
The fireplace is packaged in a EURO pallet. During transport, the
fireplace must be properly fastened in order to prevent tumbling or
damages.
The standard delivered fireplace set consists from
:
fireplace with door,
