SENKO fireplaces
–
Instruction manual
30
figure 14
Adding fuel in regular intervals, in quantities of 2 to 4 kg,
is
recommended.
Fireplace optimum values may be achieved only if the fireplace
nominal power was chosen in accordance with the rules of profession
and object energetic efficiency.
5.2.3. ADDING FUEL
Apart from use of appropriate fuel and satisfactory chimney flue draught,
the manner in which the fireplace is fuelled
also influences the glass
cleanness
.
We recommend only
one layer in each fuel refill
and, if possible, the
use of logs of length up to 2/3 of the firebox length
. There should be
a
minimum distance of 1-2 cm between the logs.
Briquettes should be used
in amount that only covers the firebox
surface, also with a
minimum distance of 1-2 cm
between them.
WARNING!
New fuel quantities should be added only on top of
embers, i.e., not on the flames, but only on top of embers (approx. 1
cm thick).
Primary air automatic regulator must be completely closed at least
ten seconds before opening the firebox door to prevent the breach of
flue gases into the residential area
.
