SENKO fireplaces
–
Instruction manual
11
rooms or flats with air circulation or hot air circulation with
ventilation systems (air condition, extractor or kitchen hoods),
except if such ventilation systems have safety mechanisms,
which sustain the air pressure above 4 Pa in a room, where the
fireplace is mounted or in rooms which are in direct contact with
exterior air.
3. TECHNICAL FEATURES
SENKO fireplaces are
made of quality boiler metal sheets
. The water
container is located at the rear, on the sides and at the top. This is why
SENKO fireplaces have a
high efficiency rate
and can be mounted
combined with any other heating system.
At the bottom is an ash box, above it the firebox and at the top there are
tubes for room air heating.
Attachments for the central heating system are located on the rear side
of the fireplace.
Figures below are showing the supplied parts of the fireplaces.
