USER MANUAL – Z-PASS1/Z-PASS2
137
If “Modem Available” parameter value is changed, when clicking on the “APPLY” button the system is
restarted, as shown in the following figure:
The “Modem Available” parameter value should be changed only in the following situations:
for Z-PASS1, when an external Z-MODEM-3G modem is not available, the value shall be set to “No”
and, conversely, when the modem is connected, the value shall be set to “Yes”
In the “Mobile Network” page, when you click on the “SHOW MOBILE STATUS” button, a new section
appears, named “Mobile Status”, showing:
