USER MANUAL – Z-PASS1/Z-PASS2
146
Since this is the digital output used
to monitor remote connection, its
value (“Remote connection active”)
cannot be changed.
Output 2 Mode
This parameter represents the
operating mode of the Digital
Output 2 (DO 2).
Possible
modes
are:
“General
output” | “Remote toggle”
20
.
General output
Input/Output 1 Mode
This parameter represents the
operating mode of the Digital
Input/Output 1 (first configurable
digital I/O) (DIDO 1).
Since this is used as an input for
“Remote
Connection
Disable”
feature,
its
value
(“Remote
connection disable”) cannot be
changed.
Remote connection disable
Input/Output 2 Mode
This parameter represents the
operating mode of the Digital
Input/Output 2 (second configurable
digital I/O) (DIDO 2).
Possible modes are: “General input”
| “General output” | “Local alarm”.
General output
Service Disable
This parameter determines which
access services are disabled when
“Remote Connection Disable” digital
input is HIGH.
Possible values are: “None” | “VPN
Connection” | “VPN Service” |
“Internet Connection”.
See chapter 16, for a detailed
description of these values.
VPN Connection
The “Digital I/O Status” section of the page gives the current status values (“LOW”/”HIGH”) for each of the
four available digital I/Os.
18.14
FW Versions
By clicking on the “FW Versions” link, in the “Diagnostics” menu, you come to the following page:
20
“Remote toggle” function is still to be defined.
