USER MANUAL – Z-PASS1/Z-PASS2
20
DIDO Green
ON
OFF
Configurable Digital Input/Output state is HIGH
Configurable Digital Input/Output state is LOW
DO Green
ON
OFF
Digital Output state is HIGH
Digital Output state is LOW
RCD Green
ON
OFF
Remote Connection is disabled
Remote Connection is enabled
VPN Green
ON
Blinking
OFF
VPN connection is working properly
VPN connection is not working properly
VPN functionality is disabled or
VPN Box/Point-to-Point functionality is enabled but no client is connected or
VPN Box/Single LAN functionality is enabled but the Device is not configured
yet
LAN/WAN
Green
ON
OFF
The Ethernet ports are working in “LAN/WAN” mode
The Ethernet ports are working in “Switch” mode
SERV Green
ON
Blinking
OFF
VPN Box “SERVICE” connection is working properly
VPN Box “SERVICE” connection is not working properly
VPN Box functionality is disabled
RX2-4 Green
Blinking
ON
OFF
Data reception (COM 2-4)
Check the connection (COM 2-4)
No data reception (COM 2-4)
TX2-4 Green
Blinking
ON
OFF
Data transmission (COM 2-4)
Check the connection (COM 2-4)
No data transmission (COM 2-4)
Ethernet Connector LEDS
LED
Status
Meaning
ETH1-2 Green
ON
OFF
Ethernet 1-2 connection detected
Ethernet 1-2 connection absent
ETH1-2 Yellow
Blinking
OFF
There is data activity (Ethernet 1-2)
There is no data activity (Ethernet 1-2)
