USER MANUAL – Z-PASS1/Z-PASS2
10
Removable 4 pin connector, two RJ45 connectors, USB connector and micro
USB connector (only in Z-PASS1, Z-PASS1-R01)
Two SMA antenna connectors:
- for Main and Diversity antennas (only in Z-PASS2, Z-PASS2-R01)
- for 3G and GPS antennas (only in Z-PASS2-IO)
BOX / DIMENSIONS
Dimensions
Z-PASS1: L:100 mm; H:112 mm; W:35 mm
Z-PASS2: L:100 mm; H:112 mm; W:53 mm
Case
Nylon 6 with 30% fiberglass field, self-extinguishing class V0, black color
INPUTS / OUTPUTS (Z-PASS1-IO)
Digital Inputs
Max. number of channels: 2
Voltage: OFF<4V ON>8V; Max. Current (Vout+): 20mA
Current absorbed: 3mA at 12VC; 6mA at 24VC
Digital Outputs
Max. number of channels: 3
Voltage (+Vext): 10 – 24VC
Max. current delivered: 400mA
INPUTS / OUTPUTS (Z-PASS2-IO)
Digital Inputs
Max. number of channels: 4
Voltage: OFF<4V ON>8V; Max. Current (Vout+): 20mA
Current absorbed: 3mA at 12VC; 6mA at 24VC
Digital Outputs
Max. number of channels: 4
Voltage (+Vext): 10 – 24VC
Max. current delivered: 400mA
The following table shows which frequency bands are supported by the HSPA modem available in Z-PASS2, Z-PASS2-
R01 and Z-PASS2-S-IO products.
Standard
Frequency
Z-PASS2, Z-PASS2-R01
Z-PASS2-S-IO
GSM
GSM 850 MHz
OK
OK
EGSM 900 MHz
OK
OK
DCS 1800 MHz
OK
OK
PCS 1900 MHz
OK
OK
WCDMA
WCDMA 800 MHz
OK
WCDMA 850 MHz
OK
WCDMA 900 MHz
OK
OK
WCDMA 1900 MHz
OK
WCDMA 2100 MHz
OK
OK
HSPA
HSDPA
OK
OK
HSUPA
OK
OK
HSPA+
OK
DRX
Receiver Diversity
OK
OK
5
Electrical Connections
Power Supply and Modbus interface are available by using the bus for the Seneca DIN rail, by the rear IDC10 connector
