USER MANUAL – Z-PASS1/Z-PASS2
17
RX1/TX1 Red
Blinking
OFF
Data reception/transmission on COM1 port
No data reception/transmission on COM1 port
RX2/TX2 Red
Blinking
OFF
Data reception/transmission on COM2 port
No data reception/transmission on COM2 port
RX4/TX4 Red
Blinking
OFF
Data reception/transmission on COM4 port
No data reception/transmission on COM4 port
3G PWR Green
(Z-PASS2 only)
ON
The 3G Modem is powered on
STAT Yellow
(Z-PASS2 only)
ON
Slow Blinking
Fast Blinking
Not registered on GSM network
Registered on GSM network
PPP connection active
6.2
Z-PASS1-R01/Z-PASS2-R01
LED
Status
Meaning
PWR Green
ON
The module is powered on
RUN Red
Blinking
The module is ready for use
LAN/WAN
Yellow
ON
OFF
The Ethernet ports are working in “LAN/WAN” mode
-
SWITCH Green
ON
OFF
The Ethernet ports are working in “Switch” mode
-
VPN Yellow
ON
Blinking
OFF
VPN connection is working properly
VPN connection is not working properly
VPN functionality is disabled or
VPN Box/Point-to-Point functionality is enabled but no client is connected or
VPN Box/Single LAN functionality is enabled but the Device is not configured
yet
SERV Green
ON
Blinking
OFF
VPN Box “SERVICE” connection is working properly
VPN Box “SERVICE” connection is not working properly
VPN Box functionality is disabled
RX1-2-4 Red
Blinking
ON
Data reception (COM 1-2-4)
Check the connection (COM 1-2-4)
