OmniHub CMP100 – User Manual
Page
36
of
106
3.3.2
CR-DVBC-01
CR-DVBC-01 is a 4-channel DVBC Annex B/ISDBT receiving and descrambling module
with 1 RF female connector and 2 CI slots. It can receive 4 RF channels signal
simultaneously and support 2 CAM cards descrambling. Configuration of the module is
very much similar with CR-DVBC-00, please refer to this module for the configuration
procedures at page 31 to 35.
3.3.3
CR-DVBS2CI-00
CR-DVB S2 CI-00 is a 4-channel DVB-S/S2 receiving and descrambling module with 2
RF connectors and 2 CI slots, each RF connector can connect with 2 transponders. Status
and CI pages refer to CR-DVBC-00 module section at page 31 to 33.
3.3.3.1
Module Settings
Parameter Setting of DVBS2CI show where you input the information of the source signal.
The table below show the parameter range on each field. For the LNB power, channel 1.1
and 1.2 both via LNB-1 share power with each other, channel 2.1 and 2.2 both via LNB-2
share power with each other.
Name
Range
Satellite Frequency (KHz)
950000~2150000
Symbol Rate (KBaud)
1000~45000
LNB Frequency (KHz)
950000~21500000
LNB Power
Off/13V/18V
LNB 22KHz
Off/22KHz
