OmniHub CMP100 – User Manual
Page
25
of
106
In order to create or edit a larger number of IP inputs, use the Batch Setting
button.
Click the Apply
button on the right side to make the change takes effect.
Service Configuration
is used to route a whole stream or service/s from the IP input
towards the output channel (stream). Two types of routing are possible:
1.
Bypass mode
routes whole input transport stream towards output channel.
Bypass mode activation causes output channel will be occupied only by this
stream. Any attempt of routing other stream/service towards this channel will
result
“this channel won’t be available at this time”.
2.
Multiplex mode
is used to create a new SPTS or MPTS. This mode allows the
administrator to perform the following operations:
a. Routing single service towards output channel will results in SPTS creation
b. Routing services towards single output channel will results in MPTS creation
c. Routing service/s AND stream/s from multiple channel towards single output
channel will results in MPTS creation
To use
Bypass
or
multiplex mode on stream level
, click the
icon. A new window
will appear, select the output stream/channel where stream will be bypass or multiplex.
Don’t forget to click the
button on the right side to make the change takes effect.
