OmniHub CMP100 – User Manual
Page
74
of
106
3.3.15.1 Module Status
Please see CR-DVBC-00 at page 31 for reference. See also image for QAMB Status.
3.3.15.2
Module Settings
This page allows the customer to input the output parameter for the QAM required by the
network.
Click the
Apply
button in the right side to make the change take effect.
Name
Range
Name
Range
Bandwidth (MHz)
6
Channel Standard
US cable/STD/IRC/
HRC
Symbol Rate
(KBaud)
5056.941 (QAM 64)
5360.537 (QAM 256)
RF level
15~48 (dBmV)
PSI/SI Interval
(ms)
50~10000
Constellation
QAM 64/256
Channel No.
Up to Channel Standard
3.3.15.3 Service Configuration
Service Configuration for QAMB are very simply compared to QAMA. Here, you just
have to edit the Original network ID and TSID to the correct label you want to. You can
also edit the Service parameter like Service ID, Name, Provider, PID, etc.,
System operation of CM-QAMB are same with other modules. See page 69 to 72 for
reference.
