OmniHub CMP100 – User Manual
Page
38
of
106
3.3.5.1
Module Status
To display the status of the 8VSB receiver, select the module of interest from the list of
modules on the left. Then click on the
Status
button visible in the top bar of the 8VSB
navigation buttons. Status tab shows Locked Status, Total Bit Rate, Effect Bit Rate, TS
Analysis and Service List for each 8VSB input stream.
3.3.5.2
Module Settings
To make configuration changes in the context of the channel plan and the receiving
frequency of the specific RF input, select the appropriate receiving module and then click
on the
Settings
tab. The channel plan and frequency of a specific receiver are selected
using drop-down lists.
Table below presents supported channel plans.
Channel Plan
Frequency of RF Channels
Off-Air
CH2 57MHz, CH3 63MHz, CH4 69MHz~CH67 791MHz, CH68797MHz,
CH69 803MHz
STD
CH2 57MHz, CH363MHz, CH4 69MHz~ CH133 849MHz, CH134855MHz,
CH135 861MHz
