OmniHub CMP100 – User Manual
Page
77
of
106
Module Settings is where we input the source parameters. Once done, click on apply for
the changes to take effect and check on the status in the channel signal is Locked.
Name
Range
Name
Range
Bandwidth
6M, 7M, 8M
RF level
0~31.5 (dBmV)
60~91.5 (dBuV)
Frequency (KHz)
48000~862000
3.3.18.2 Service Configuration
For the Configuration of the OFDM module. This is like the configuration of CM-QAMA-
00/R00. You can also change the Original Network ID, TSID, Service Name, PID and
create LCN Descriptor and Cable Descriptor. For more details, please check CM-QAMA-
00 at page 70 for reference.
3.3.19
CM-ISDBT-R01/R01A
CM-ISDBT-R01/R01A module supports up to 4/8 adjacent frequencies modulating with 1
RF female connector for output.
3.3.19.1 Module Settings
After inputting the parameters on the Modules Settings, always click the
Apply
button in
the right side to make the change take effect. Make sure the Signal is lock on the Modul
e Status page.
