OmniHub CMP100 – User Manual
Page
10
of
106
1.1 Product Introduction
OmniHub CMP100 is a new generation of Compact Media Platform in modular design
that focuses on both cost-effective commercial TV market and traditional DTV market.
Thanks to the benefit of high-density, strong-performance and large-flexibility, OmniHub
CMP100 product can meet all the major video delivery requirements of signal receiving,
descrambling, encoding, multiplexing, modulation and IP processing in one unit.
With optional commercial/broadcast encoder, multi-mode receiver/modulator module, it
can be configured flexibly to meet any video delivery requirements. Due to its compact
design and powerful function, it can be widely used at hotel, hospital, community, club,
campus and DTV headend room, where massive programs are required to be processed
in a cost-effective way. OmniHub CMP100 provides with a straight-forward web interface
accessible via all major browsers and complete control of the unit. Every OmniHub ships
with the software suite pre-loaded on appropriate hardware. There are optional input and
output configurations that will change the physical connectors available on the back of
the chassis.
1.2 Front Panel Overview
1. Power Status, Baseboard Status and Reset button
2. Four 1Gbe RJ45 ports: two for management and two for MPEG over IP purposes
3. Cooling Air Intake
4. 16 hot-swappable modules, each module have assigned IP address depending on
the Slot number.
5. Dual redundant power supplies
