44
C.3 For DCE connection
Parani10 is twisted Rx/Tx-ready for direct DTE connection. For connection to DCE equipment
such as modem etc., customers need to use a gender changer that twisted Tx/Rx, CTS/RTS,
and DTR/DSR for correct operation.
For more information, please contact
C.4 Hardware Reset
For Hardware reset, press the button on the right side of the Parani10 unit with a narrow tool
such as a ballpoint pen.
C.5 How to get Bluetooth CF cards connected to Parani10
If you are using Bluetooth CF cards or USB adaptors from other manufacturers, please use
Parani10_Manager software of latest version, which will be more familiar to consumers.
Parani10_Manager can be downloaded from our website at:
http://www.sena.com/support/downloads
1) In Parani10_Manager, start and go to the Device Setting menu.
2) Select
MODE3
to allow any Bluetooth device can discover and connect to this Parani10.
HARD RESET SWITCH
Summary of Contents for Parani10
Page 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Page 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Page 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Page 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
