27
Appendix A: AT command sets
The following AT command sets are supported by PARANI10. Here <cr> represents carriage
return of ASCII Code (0x0D) and <lf> represents line feed of ASCII Code (0x0A).
AT<cr>
Function :
Check the presence of your PARANI10.
Response :
<cr><lf>OK<cr><lf> or
<cr><lf>ERROR<cr><lf>
Description :
In standard mode, you can check whether your PARANI10 is connected to a
host correctly by using this AT command.
ATZ<cr>
Function :
Do soft-reset
Response :
<cr><lf>OK<cr><lf> or
<cr><lf>ERROR<cr><lf>
Description :
You can do soft-reset by using this AT command. When your PARANI10 is
already connected to the other device, it disconnects the connected device.
You can halt the current ongoing operation by using this command.
AT&F<cr>
Function :
Restore the default configuration of your PARANI10.
Response :
<cr><lf>OK<cr><lf> or
<cr><lf>ERROR<cr><lf>
Description :
You can restore the default configuration of your PARANI10 by executing this
AT command.
AT+BTINQ?<cr>
Function :
Search (INQUIRY) other Bluetooth devices nearby.
Response :
<cr><lf>BD_ADDR, Device Name , Class of Device<cr><lf>
<cr><lf>BD_ADDR, Device Name , Class of Device<cr><lf>
…
<cr><lf>BD_ADDR, Device Name , Class of Device<cr><lf>
<cr><lf>OK<cr><lf>
Description
:
This command is used to inquiry other Bluetooth devices nearby. The
INQUIRY process is carried out during the predefined time duration (30
Summary of Contents for Parani10
Page 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Page 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Page 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Page 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
