29
‘AT+BTCANCEL’ to cancel this operation. This AT command has the same
effect of ‘AT+BTSCAN,3,0’.
AT+BTSCAN, n, to<cr>
Function :
You can force your PARANI10 to do INQUIRY SCAN or PAGE SCAN.
Response :
<cr><lf>OK<cr><lf>
<cr><lf>CONNECT<cr><lf>
or
<cr><lf>OK<cr><lf>
<cr><lf>ERROR<cr><lf>
Description :
To make PARANI10 to be
Discoverable
and
Connectable
from other
Bluetooth devices, you should set its INQUIRY SCAN and PAGE SCAN. To
make your PARANI10 do INQUIRY SCAN only, you should set n as 1. To
make your PARANI10 do PAGE SCAN only, you should set n as 2. When n is
set to 3, your PARANI10 does INQUIRY SCAN and PAGE SCAN alternately.
Here, ‘to’ indicates the time out interval of INQUIRY SCAN and PAGE SCAN
operations. If you set ‘to’ to ‘0’, your PARANI10 does INQUIRY SCAN and
PAGE SCAN until it has a connection from other Bluetooth device. Your
PARANI10 returns ‘CONNECT’ message when it is connected from other
Bluetooth device within the given time out intervals. Otherwise, it returns
‘ERROR’ message.
AT+BTSCAN, BD_ADDR, to<cr>
Function :
Wait Bluetooth connection from a device with given BD_ADDR.
Response :
<cr><lf>OK<cr><lf>
<cr><lf>CONNECT<cr><lf>
or
<cr><lf>OK<cr><lf>
<cr><lf>ERROR<cr><lf>
Description :
Once you enter this AT command, your PARANI10 does PAGE SCAN.
However, it waits a connection from a Bluetooth device with the given
BD_ADDR. This process lasts during ‘to’ time interval. Especially when ‘to’
has value of ‘0’, your PARANI10 waits connection infinitely.
AT+BTCANCEL<cr>
Function :
Cancel currently ongoing operation of your PARANI10.
Summary of Contents for Parani10
Page 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Page 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Page 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Page 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
