16
1-9.
P01
now became ‘Discoverable/Connectable’ so it can receive Bluetooth connection from
P02
.
The STATUS LED of
P01
will blink green, twice every 3 seconds.
1-10. Detach
P01
from your computer, making sure its status LED is blinking green.
1-11. Close Parani10_Manager.
3.1.2 Let’s make
P02
search and connect to
P01
.
2-1. Attach
P02
to your PC, and start Parani10_Manager.
2-2. Select the number of the Serial port where
P02
.
2-3. Users need to select exactly same Baud/Parity/StopBit as the setting of attached
P02
.
9600/No/OneStopBit is default setting of all of Parani10s.
2-4. Press OK button.
2-5. Select the ‘
Connection(out)
’ icon in the list control box and click the SEARCH button.
<Fig. 3.1.5>
2-6. Search
P01
from the searched list. Device Address of
P01
can be found on the back side of
P01
. If you find
P01
, press Cancel button to finish searching.
Make sure that Status LED of
P01
is still blinking in Green.
2-7. Please select
P01
from the searched list, then press CONNECT TO button.
Summary of Contents for Parani10
Page 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Page 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Page 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Page 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
