30
Response :
<cr><lf>OK <cr><lf>
Description :
This AT command works only when your PARANI10 is busy in doing
‘AT+BTSCAN’, ‘ATD’ or ‘AT+BTINQ?’. Once canceled successfully, your
PARANI10 will become STANBY STATUS’.
+++
Function :
Make transition from ONLINE STATUS to STANDBY STATUS.
Response :
<cr><lf>OK <cr><lf>.
Description :
If you input ‘+++’ string to your PARANI10 in ONLINE STATUS, your
PARANI10 goes into STANBY STATUS. Once PARANI10 enters into
STANDBY STATUS, you can use any AT command sets supported by
PARANI10.
ATO<cr>
Function :
Make transition from STANBY STATUS to ONLINE STATUS.
Response :
None
Description :
This AT command is the counter operation of ‘+++”. You can change the
operating status to ONLINE STATUS again by using this command. In
ONLINE STATUS, the data can be transferred between two hosts. The
existence of your PARANI10 becomes transparent to any host applications
which use serial ports.
ATH<cr>
Function :
Release the current Bluetooth connection.
Response :
<cr><lf>OK<cr><lf>
<cr><lf>DISCONNECT <cr><lf>.
Description :
This AT command can be used for disconnecting the existing Bluetooth
connection.
AT+BTSEC, Authentication, Encryption <cr>
Function :
Set Bluetooth authentication or encryption features selectively.
Response :
<cr><lf>OK<cr><lf>.
Description :
By using this AT command, you can set authentication or encryption feature of
your PARANI10 during Bluetooth connection process. Once you set
authentication or encryption features, your PARANI10 stores its status. To
release authentication or encryption features you set, you should use this AT
Summary of Contents for Parani10
Page 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Page 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Page 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Page 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
