32
Description :
When the authentication is enabled in your PARANI10, you should assign
passkey. Two Bluetooth devices which are to be connected should have the
same passkey. The default passkey of your PARANI10 is ‘1234’. You can
assign maximum 16 alphanumeric characters as a passkey.
AT+BTINFO?<cr>
Function :
Return the internal status of your PARANI10.
Response :
<cr><lf>BD_ADDR,Name,Mode,Status,Auth,Encryp<cr><lf>
<cr><lf>OK<cr><lf>
Description :
When you enter this AT commands at a host terminal, your PARANI10 returns
its device information and status to a host. It encompasses BD_ADDR, user
friendly name, operating mode, operating status and authentication/encryption
status. Especially when the operating status is PENDING, it means your
PARANI10 is busy in processing ‘AT+BTINQ?’, ‘ATD’ or ‘AT_BTSCAN’. When
Authentication or Encryption feature is activated, the corresponding
parameter has value of ‘1’.
AT+BTLPM,n<cr>
Function :
Set Bluetooth Low power consumption mode.
Response :
<cr><lf>OK<cr><lf>
Description :
To minimize power consumption, your PARANI10 supports Bluetooth PARK
mode. When you set n as 1, your PARANI10 uses PARK mode. Using PARK
mode might cause extra data transmission delay in some cases.
AT+BTSD?<cr>
Function :
Return the list of secured devices.
Response :
<cr><lf>BD_ADDR<cr><lf>
<cr><lf>BD_ADDR<cr><lf>
…
<cr><lf>BD_ADDR<cr><lf>
<cr><lf>OK<cr><lf>
Description :
Your PARANI10 can pair up to 5 Bluetooth devices. Upon receiving this AT
command, your PARANI10 returns all the BD_ADDRs of the previously paired
Bluetooth devices.
Summary of Contents for Parani10
Page 1: ...1 Parani10 Enabling Wireless Serial Communication Users Guide Version 1 0 0 2005 03 07...
Page 3: ...3 Revision History Revision Date Name Description V1 0 0 2005 03 02 D H Shin Initial Release...
Page 7: ...7 Fig 1 2 1 DC Power Cable Red colored wire of DC power cable is for...
Page 41: ...41 HIGHT 35 mm 3 2 OUTPUT CABLE CABLE LENGTH 1850 50...
