48
commeo commissioning/setting by radio
5.2. Functions with one selected receiver
Transmitter in SELECT mode
If a drive with a transmitter has been selected, the following settings can be configured.
STOP 9 s
PROG 1 s
STOP 6 s
PROG 6 s
PROG 9 s
STOP + PROG 3 s
Manual setup mode, deletion and manual setting of the end
positions
in operation bottom position, top position without relief
(see 5.2.3.)
Semi-automatic setup mode, deletion and semi-automatic set-
ting of the end positions
in operation bottom position, top stop WITH relief
(see 5.2.1.)
in operation bottom position, top stop WITHOUT relief
(see 5.2.2.)
Programming/deleting transmitters (see 5.2.4.)
Transmitter programmed green status LED
Transmitter deleted red status LED
Delete transmitter table in the receiver (see 5.2.5.)
Reset receiver to factory settings (see 5.2.6.)
CONFIGURATION mode (only for authorised qualified personnel)
(see 5.2.7.)
Receiver selected in
SELECT mode