32
Safety information
1. Safety information
Warning!
Important safety information for installation and operation!
Always observe this information to ensure safety. Incorrect
installation and assembly can lead to severe injuries.Store
this information securely.
• Always observe the following:
· The applicable laws, standards and regulations
· National regulations
· Regulations of the local energy suppliers and specifications for
humid locations as per VDE 0100
· The safety information in DIN EN 60335
· The state of technology at the time of installation
· These operating instructions, along with those for connected com-
ponents
• Only authorised specialist personnel may connect the drive. Switch
off the supply of voltage to the system when performing installation
and maintenance work.
• When performing installation, maintenance or repair work on the
drive, make sure to disconnect all of the system’s poles from the
power supply, with a contact opening of at least 3 mm per pole (DIN
EN 60335). Take suitable measures to prevent accidental activation.
• Before installing the drive, remove all unnecessary wires and switch
off all systems and devices that are not required for powered oper-
ation.
• These operating instructions are considered part of the device and
warranty conditions. They must be provided to the electrician and
the user.
