Segway Human Transporter e Series Instructor Manual And Participant Workbook Download | Manualshive

Page: 86 / 106

background image

Page 86 of 106

Basic Rider Optimization Training for the Segway



HT

Instructor Guide and Participant Workbook

Rev 3.5i - January 2004

© Segway LLC 2002

P/N 1707100001aa

Post-repair Checklist

Display and Audibility Test

LCD – display (Make sure the display properly shows startup test; and Segway HT turns on
in Power Assist Mode without an error message in the display.)

Sound (Make sure Segway HT produces a beep when a Key is used to power on the
Segway HT.)

Charging indicator check at the Control Shaft Base (see “Charging Indicators” on page 70.)

Operational Test

Check for obstructions under the Mat.

Check the Control Shaft for tightness.

Power the Segway HT on and off two times.

Power on the Segway HT to test the Rider Detect Sensors. (Make sure that the display does
not indicate that a Rider Detect Sensor is engaged at startup, and that the Segway HT does
detect a Rider Detect Sensor is depressed when you place your foot on the Mat.)

While holding the Platform of the Segway HT level, press and release the Mode Button to
switch from Power Assist Mode to Balance Mode, look for the green smiling face in the
display.

Ride the Segway HT.

Move forward and backward.

Check Power Assist Mode both forward and backward.

Check E-Stand functionality (e Series only).

Safety Check

Check that the fasteners are in place, secure, and tightened correctly.

Check the wheels for wear, tightness, and correct tire air pressure.

Check that the Mat is intact, secure, and free of debris.

Check the Grips for tightness; make sure Steering Control Grip returns to center.

Check to make sure that no part is damaged or loose.

Lifting and Loading Your Segway HT

Use safe and appropriate loading/lifting techniques when lifting your Segway HT. Make sure the
Segway HT is powered off prior to lifting. It is recommended that two people work together to lift the
Segway HT, with each placing a hand on the Control Shaft (under the Height Adjustment Collar) and
a hand under the Platform. Lift with your legs, not your back. Never lift the Segway HT by its tires,
fenders, or wheels because your hand could become caught between the tire and the fender,
resulting in injury.

Packing Your Segway HT for Shipment

Keep your original box and packing materials. Make sure you pack the Segway HT in the reverse
order from how you unpacked it. Shipping it in a non-Segway box can result in damage.

«
...
84
85
86
87
88
...
»

Summary of Contents for Human Transporter e Series











































































































Reviews:

No comments

Related manuals for Human Transporter e Series

Brand: Lacros Pages: 14

Brand: X-TREME Pages: 1

Brand: Segway Pages: 3

Brand: Fortis Pages: 20

Brand: iScooter Pages: 21

Brand: Razor Pages: 15

Brand: GOVECS Pages: 219

Brand: Blaupunkt Pages: 146

Brand: Costway Pages: 3

Brand: Costway Pages: 3

Brand: Kaufmann Pages: 40

Brand: VAKOLE Pages: 9

Brand: Fiat Pages: 56

Brand: Stiga Pages: 20

Brand: niu Pages: 23

Brand: Velocifero Pages: 11

Brand: Costway Pages: 2

Brand: Razor Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands