WARNING!
Always shut down your Segway HT and unplug the Power Cord before performing any
maintenance or installing any part or accessory.
Follow these instructions carefully. Failure to follow these instructions could damage your
Segway HT and render it unsafe to use.
©2005 Segway LLC
Page 1 of 3
18987-00001aa
Questions?
If you have any questions or are missing a part, please contact an Authorized Segway
Dealer. For a list of Dealers, visit www.segway.com. Check www.segway.com for
updates to these instructions. Thank you.
Segway
®
Human Transporter (HT)
Splash Guard Replacement Instructions
i180 Model Fenders
LIMITED WARRANTY
The Segway HT Splash Guards are an “Accessory” covered for 90 days under the Segway
®
Human
Transporter Limited Warranty (copy delivered with the kit.)
Contents
> (2)
Splash
Guards
> (4) Fender Tabs
> (4) T-20 Drive Fender Fasteners
Note
: Replace any fasteners you remove
with the new fasteners included in this kit.
Tools Required
> 16 mm deep socket
> 50 N-m Torque Wrench to accommodate
the 16 mm deep socket
> Rubber
Mallet
> T-20 Six-Lobe bit (Torx T-20)
> 1.5 N-m Torque Wrench to
accommodate the Six-Lobe bit
Product Information
> Impact-resistant
construction
> Identical/interchangeable for left/right
side and all 3 positions along the fender
Splash Guards
