Segway Human Transporter e Series Instructor Manual And Participant Workbook Download | Manualshive

Page: 8 / 106

background image

Page 8 of 106

Basic Rider Optimization Training for the Segway



HT

Instructor Guide and Participant Workbook

Rev 3.5i - January 2004

© Segway LLC 2002

P/N 1707100001aa

The Segway HT operates with the same principles of operation that humans use to walk. It can go
about as fast as a person can run. It can stop and start quickly on dry pavement. It can go up and
down slopes.

Agenda

The Segway Basic Rider Optimization Training is a four-hour program providing Segway Human
Transporter (HT) riders with an introduction to basic riding techniques, safety features-- how to
recognize and respond appropriately, overview of service procedures, and spotting techniques used
in guiding other riders.

1.

15 min/

Review program goals and agenda

Company overview, company philosophy- safety, etiquette, rider responsibility

2.

20 min/

Show Safety Video

3.

15 min/

Segway HT parts and facts

Theory of operation

4.

30 min/

Demonstrate operational model to all participants.

(i and e Series together)

Guided ride/first ride for each participant. Correct posture, foot placement, stopping, moving
forward, reverse, and turning in place. Forward stop exercise – short distances, slow and
long distance, more speed, speed limiter and backward stick shake. Wide turns versus
turning in place. Maintaining lateral stability

5.

30 min/

i and p Series only: 15 min. instruction/15 min. break

e Series only or combination of models for all riders: 30 min.

*More time required for stepping on, stepping off, and weight distribution with e Series

All

step off, shut down.

Split

i and p Series riders in one group, and e Series riders in another (2 instructors).

Use of Key, Mode Button, stepping on, stepping off, and shutting down, Power Assist Mode,
Balance Mode, turn in place with new Key, cones, controlled stops.

6.

20 min/

Conduct Skills and Drills on flat and uneven terrain. Emphasize grace and control

Cones, funnel, stops, rumble strip, ramps/curbs, Power Assist Mode
Coach riders on proper techniques and behavior, and rider responsibility

7.

10 min/

Safety Q&A and demonstrations as requested.

8.

20 min/

Show/explain basic service procedures: check tire pressure, fill tires, remove Battery

Packs, straighten Control Shaft. Explain the hex wrenches.
Display Icon explanation

9.

30 min/

Ride Outside or discuss riding techniques over various surface conditions

10.

30 min/

Demonstration and Guided Ride, spotting techniques

11.

20 min/

Review, General Q&A, Hand out “Review” packet. Discuss Segway Etiquette and

Safety reminders. Riders complete Safety Quiz and Accountability checklist, and hand in to
Instructor. (Instructor must collect these, and forward to Training Coordinator in Manchester.)

«
...
6
7
8
9
10
...
»

Summary of Contents for Human Transporter e Series











































































































Reviews:

No comments

Related manuals for Human Transporter e Series

Brand: SupaScoota Pages: 21

Brand: Kettler Toys Pages: 28

Brand: Malaguti Pages: 276

Brand: CPI Pages: 37

Brand: Messingschlager Pages: 24

Brand: IU Pages: 16

Brand: Golden Pages: 41

Brand: PaceSaver Pages: 48

Brand: Blumil Pages: 23

Brand: Krinona Pages: 15

SCAMPER S600 XL

Brand: Lacros Pages: 15

Brand: X-TREME Pages: 12

Brand: X-TREME Pages: 17

Brand: X-TREME Pages: 32

Brand: X-TREME Pages: 30

Brand: KUGOO Pages: 18

Brand: NAMI ELECTRIC Pages: 107

Brand: SCOOT AND RIDE Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands