Segway Human Transporter e Series Instructor Manual And Participant Workbook Download

Page: 97 / 106

Basic Rider Optimization Training for the Segway



Page 97 of 106

Instructor Guide and Participant Workbook

Rev 3.5i - January 2004

P/N 1707100001aa

Written Assessment

Please choose only one answer for each question. Chose the

best

answer to each question.

1. Which of the following displays indicates Power Assist Mode:

(d)

2. Which of the following best describes Power Assist Mode?

(b)

Whistle, and the Segway HT will follow you around like a puppy

Power is on, but balancing mechanism is not enabled. Use Steering Grip to
power the wheels forward and backward

Power is off. Use Steering Grip to power the wheels forward and backward.

Power is on. Balancing mechanism is enabled. Use Steering Grip to turn right
and left. OK to step on and ride.

3. Which of the following displays indicates Balance Mode:

(a)

4. Which of the following best describes Balance Mode?

(d)

Whistle, and the Segway HT will follow you around like a puppy

Power is on, but balancing mechanism is not enabled. Use Steering Grip to
power the wheels forward and backward

Power is off. Use Steering Grip to power the wheels forward and backward.

Power is on. Balancing mechanism is enabled. Use Steering Grip to turn right
and left. OK to step on and ride.

5. Which of the following displays indicates that the Segway HT is shutting down:

(c)

6. Indications that the Segway HT is in Balance Mode are:

(a)

Green smiling face, wheels move when you move the Handlebar

Orange smiling face, Steering Grip is inoperative

Gray display, moving the Handlebar results in no wheel movement

Red frowning face

Summary of Contents for Human Transporter e Series











































































































Search results

Summary of Contents for Human Transporter e Series

Reviews:

Related manuals for Human Transporter e Series

Brands by name

Popular brands

Segway Human Transporter e Series, Instructor Manual And Participant Workbook

Search results

Summary of Contents for Human Transporter e Series

Reviews:

Related manuals for Human Transporter e Series

Brands by name

Popular brands