Sega Bass Fishing STD Owner'S Manual Download

Page: 33 / 94

1234567890123456789012345678

123456789012345678901234567890121234567

12345678901234567890123456789012123456789012

1234567890123456789012345678

Select C.R.T. TEST to cause the MONITOR to display the
screen shown left, allowing MONITOR adjustment status
to be checked.

Periodically check the MONITOR adjustment status on
this screen.

The screen (1/2) enables color adjustment check to be
performed. The color bar of each of the 4 colors, i.e.,red,
green, blue, and white, is the darkest at the extreme left and
becomes brighter towards the extreme right.

Press the TEST BUTTON to shift to the next screen (2/2).

The screen (2/2) allows screen size and distortion to be
tested.

Check if the CROSSHATCH FRAME LINE goes out of
the screen and if the crosshatch lines are distorted.

Press the TEST BUTTON to return to the MENU mode.

C.R.T. TEST 2/2

PRESS TEST BUTTON TO EXIT

7 - 9 C.R.T. TEST

FIG. 7.9 C.R.T. TEST

C.R.T. TEST 1/2

RED

GREEN

BLUE

WHITE

PRESS TEST BUTTON TO CONTINUE

7 - 10 TIMER TEST

FIG. 7.10 TIMER TEST

TIMER TEST

1997, 10/31 (FRI)

00 : 00 : 00

BATTERY

O.K.

YEAR

1997

MONTH

DAY

HOUR

MINUTE

SECOND

SET
>EXIT

PRESS TEST BUTTON TO EXIT

This test mode allows the setting of year, month, and
day, as well as built-in battery, and real time clock to be
checked.

Press the Service Button to bring the arrow to the setting
item.

Press the Test Button to set the desired value for each
item.

Press the Service Button to move the arrow and bring it
to SET, then press the test button to change to the set
value.

Bring the arrow to EXIT and press the test button to
return to the menu mode.

Summary of Contents for Bass Fishing STD































































































Search results

Summary of Contents for Bass Fishing STD

Reviews:

Related manuals for Bass Fishing STD

Brands by name

Popular brands

Sega Bass Fishing STD, Owner'S Manual

Search results

Summary of Contents for Bass Fishing STD

Reviews:

Related manuals for Bass Fishing STD

Brands by name

Popular brands