Sega Bass Fishing STD, Owner'S Manual

Page: 38 / 94

35
7 - 13 VOLUME SETTING
VOLUME SETTING
AUTO SETTING
PULL POSITION MAX dd (df) MIN 74 (75)
SWING POSITION MAX 98 (95) MIN 07 (03)
REEL NEUTRAL 88 (88)
>CONTINUE WITH SAVE
CONTINUE WITHOUT SAVE
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Fig. 7.13a VOLUME SETTING
This allows Slide Volume to be set.
VOLUME SETTING
MANUAL SETTING
TENSION MAX da (de) MIN 07 (06)
STICK X MAX ao (aB) MIN 61 (62) NEUTRAL 82 (83)
STICK Y MAX af (a1) MIN 66 (63) NEUTRAL 84 (84)
>EXIT WITH SAVE
EXIT WITHOUT SAVE
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Fig. 7.13b VOLUME SETTING
Settings of volumes, etc., can be executed. Volume setting
has 2 catagories, i.e., AUTO SETTING and MANUAL
SETTING. AUTO SETTING performs the setting of the
Volume of the portions that can be set automatically.
MANUAL SETTING executes the setting of the Volume of
the portions that can only be set manually. Selecting
VOLUME SETTING causes AUTO SETTING to be
executed first.
AUTO SETTING
AUTO SETTING starts of itself. By holding the rod, when
the line is pulled, move the rod forward so that the line will
be withdrawn up to the limit. If the length is short, “LINE
ERROR” occurs.
When “LINE ERROR” occurs, check to see if the length of
the knotted portions at both ends of the line is appropraite
or not by referring to Section 8. If the “LINE ERROR” still
occurs when the length of the knotted portions is appropri-
ate, then replace the line. During setting, “AUTO SET-
TING NOW” is displayed. When setting is finished,
“AUTO SETTING COMPLETE’ and each Volume value
are displayed.
By using the Service Button, select CONTINUE WITH
SAVE, press the Test Button to have the results stored, and
proceed to the next mode.