Sega Bass Fishing STD, Owner'S Manual

Page: 51 / 94

48
For the purpose of static prevention,
special coating is applied to the CRT
face of this product. To protect the
coating, pay attention to the following
points. Damaging the coating film can
cause electric shock to the customers.
For the caution to be heeded when
clearing, refer to the Section of Periodic
inspection Table.
Do not apply or rub with a hard item (a
rod with pointed edge, pen, etc.) to or
on C.R.T. surfaces.
Avoid applying stickers, seals, etc. on
the C.R.T. face.
Do not remove aluminum foils from the
C.R.T. corners. Removing the aluminum
foils can cause static prevention effects
to be lowered.
Static preventive coating is applied to the CRT surfaces. When clean-
ing, pay attention to the following points. Peeling off static prevnetive
coat can cause electric shock.
Remove smears by using a dry, soft cloth (flannels, etc.). Do not
use a coarse gauze, etc.
For smear removing solvent, alcohol (ethanol) is recommended.
When using chemical detergent, be sure to follow instructions
below:
*Dilute chemical detergent with water and dip soft cloth in and then
thoroughly wring it to wipe smears off.
*Do not use a chemical detergent containing an abradant, powder or
bleaching agent.
*Do not use alkaline chemical detergents such as “glass cleaner” avail-
able on the market or solvents such as thinner, etc.
Do not rub or scratch the CRT face with hard items such as
brushes, scrub brush, etc.
10 - 2 CAUTIONS TO BE HEEDED WHEN CLEANING THE CRT SURFACES