Sega Bass Fishing STD, Owner'S Manual

Page: 41 / 94

38
8 - 2 REPLACING THE EXTENSION SPRING
In the case the centering action (to return to the center position) of the reel (rod) is inactive, the cause
may be the secular change of or damage to Extension Spring and Torsion Spring. Replace the Exten-
sion Spring in the following procedure. Prepare a Spanner (width across flats: 5mm), narrow-edged
flat blade type screwdriver, and Philips type screwdriver (M3 and M4 screws).
Turn power off and open the Control
Panel.
By securing the pin head with
spanner, remove the 2 screws with
screwdriver and remove the Spring.
As shown in the PHOTO,
insert the Spray Grease
Nozzle to the inside of Guide
plate and apply grease to the
sliding friction portions of
the part.
1
2