Sega Bass Fishing STD, Owner'S Manual

Page: 52 / 94

49
Monitor adjustments have been made at the time of shipment. Therefore do not
make further adjustment without a justifiable reason. Adjusting the monitor which
contains high tension parts is dangerous work. Also, an erroneous adjustment can
cause deviated synchronization and image fault, resulting in malfunctioning.
To determine whether or not the adjustment is needed, make judgment by watching
the monitor’s adjustment screen of the replaced Game Board. Normally, monitor
adjustment is made with knobs and switches on the Adjustment Board that can be
seen by opening the Control Panel Base. Note that in the monitor of this product,
correct images can not be obtained unless the settings of the horizontal frequency
or video input connector (input impedance/input level) are compatible with the
board. When the Game Board is replaced, check the settings.
10 - 3 ADJUSTMENT METHOD
First unplug the plug and then operate the switch. Operating the switch as is energized can
cause damage and malfunctioning. Connect only the video input connector which is set in the
maner consistent with the Game Board, Connecting any one other than the set connector or
setting from the predetermined setting can cause malfunctioning.