Sega Bass Fishing STD, Owner'S Manual

Page: 55 / 94

52
1
2
3
4
5
6
By holding the Monitor’s sheet metal
portion, pull out the monitor from the
cabinet. Since the Monitor is a heavy
item, be sure to use 2 workers to
perform this work.
When installing the monitor to the
cabinet, to position the CRT vertically,
ensure the Connector Plate is on the
right-hand side of the CRT and position
the CRT horizontally, ensure the
Connector Plate is underside the CRT.
Install the Spring and Nut for the
monitor’s four corners.
In the manner consistent with the
Game Board setting, connect the video
input connector, and make connector
connection with the other 2 connectors
of the Connector Plate.
Operate the mode change switch in the
manner consistent with the Game
Board setting.
Install the mask. Insert the 2 Mask
holders which are projecting from the
upper part of the Front Piece’s Mask
installation portion into the Mask’s 2
slits, and press the Mask’s underside in.