Sega Bass Fishing STD, Owner'S Manual

Page: 59 / 94

56
13 . TROUBLESHOOTING
PROBLEMS CAUSE COUNTERMEASURES
With Main SW Power is not supplied. Plug in correctly
ON, no activation
Power supply/voltage is not correct. Make sure that power supply/voltage is
AC main fuse causes the Check fuse. Remove the cause of
power to be cut off due to momentary overload and replace fuse
overload.
Rod Controller’s Volume Setting Failure Perform Volume setting
Movements are
unsatisfactory
Encoder malfunctioning Replace Encoder.
The fuse is blown due to an overload. Replace Fuse.
Brake malufunctioning Replace Brakes
Thermal element functioned Activates @70
°
C, recovers after cool-off.
Irregular sound Greasing to gear mesh portion is not Apply greasing or eliminate extraneous
emitted from satisfactory, or extraneous matter matter.
inside Rear Cabinet mixed in.
The color of the Connector connections are defective. Check the connection for the RGB and
image on PROJ. SYNC connectors of the PROJ. TERM.
screen is incorrect. BD and VPM BUFFER BD.
The image on PROJ. Affected by the magnetic field of Make CONVERGENCE adjustment.
screen has color installation location. (Refer to Section 9.)
deviation.
No sound is emitted. Sound Volume adjustment is not Adjust sound volume. (see Section 6).
appropriate.
Sound BD and speaker are Perform sound test to find and replace
malfunctioning. defective parts.(Refer to Section 6).
Lateral mecha does Motor’s Overheat. Motor replacement is needed. (Check Motor
not function. Driver as this may be malfunctioning.)
The Fluorescent The Fluorescent tube is burnt out. Replace the Fluorescent tube
lamp does not (Refer to Section 10).
light up.
Switches of Connection fault of connector Accurately connect the connector.
Control Panel between Front and Rear Cabi.
do not function
correctly
Should trouble occur, first check connector connections.