ASSEMBL
Y
AND INST
ALLA
TION
1
ASSEMBLY AND INSTALLATION
• Perform assembly work by following the procedure herein stated. Failure to
comply with the instructions can cause electric shock.
• Perform assembling as per this manual. Since this is a complex machine,
incorrect assembling can cause an electric shock, machine damage and/or
improper functioning as per specified performance.
• When assembling, more than one person is required. Depending on the
assembly work, there are some cases in which working by one person alone
can cause personal injury or parts damage.
• Ensure that connectors are properly connected. Improper connections can
cause electric shock.
• Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a risk of fire.
• This work should be carried out by site maintenance personnel or other qualified
professionals. Work performed by non-technical personnel can cause a severe
accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation.
If no one with proper technological expertise is available, request service from
the office indicated in this document or the point of purchase so as to ensure
safety.
• Provide sufficient space so that assembling can be performed. Performing
work in places with narrow space or low ceiling may cause an accident and
assembly work to be difficult.
• To perform work safely and avoid serious accident such as the cabinet falling
down, do not perform work in places where step-like grade differences, a ditch,
or slope exist.
• The seat will continue to move even if it comes into contact with persons other
than the player. In order to ensure a safe operating environment, place the
machine so that one side is adjacent to the back of another game machine or
to the wall.
• If the machine is placed so that people will be passing through the vicinity,
leave at least 70 cm of space around the machine. If this space is too narrow,
persons other than the player may brush against or collide with the machine,
possibly resulting in accidents.
• Do not leave power cords, ground wires, or network cables exposed in areas
of heavy foot traffic. Doing so may cause them to become damaged, possibly
resulting in electric shock and/or short circuits. When laying wiring across the
floor, always use safety covers to protect the wires. (Wiring diameter: power
cable - approx. Ø 8; network cable - approx. Ø 5)
• Have a flashlight or another supplementary lighting unit available while working.
With indoor lighting alone, the cabinet interior may be too dark. Working without
proper lighting can lead to accidents. It also hinders proper work performance.
Summary of Contents for AFTER BURNER CLIMAX
