Sega AFTER BURNER CLIMAX, Owner'S Manual

Page: 164 / 234

0
NETWORK PLA
Y
1
On the network play setting screen, set LINK NUM. Press the SERVICE Button, move the cursor onto
LINK NUM and select it.
When the TEST Button is pressed, the LINK NUM preset value changes. Set “2” in each of the two game
machines. When “2” has been set, LINK ID appears below LINK NUM.
FIG. 20-3b
Press the SERVICE Button, move the cursor to LINK ID and select it.
When the TEST Button is pressed, the preset value of LINK ID changes. Set [1] in one machine and [2] in
the other machine.
Press the SERVICE Button and move the cursor to EXIT.
10
When the TEST Button is pressed, the network play setting screen exits and the game test mode menu
reappears.
11
Press the SERVICE Button, move the cursor to EXIT and press the TEST Button. The system test mode
menu reappears.
1
Press the SERVICE Button, move the cursor to EXIT and press the TEST Button. The test mode terminates.
Note that initialization now takes place when the power is engaged.
1
Upon completion of initialization, network check begins. The monitor screen shows that network check is in
progress.
1
If there are no problems with the connections and settings for network play, the Attract Mode is established.
When the Attract Mode screen appears, setting is completed.
Network check will be completed after about 20 seconds or longer. If the network check screen continues to
be displayed, there could be an error in the settings, error in the network cable connections, faulty network
cable connection, cable disconnection, etc.