Sega AFTER BURNER CLIMAX, Owner'S Manual

Page: 53 / 234

PRECAUTIONS WHEN MOVING THE MACHINE
- TRANSPORT WHEN ENTRANCE IS NARROW OR LOW
Before removing guard pipe or handgrip, hold the pipe or grip firmly, then remove
fastening bolts or screws. If pipe or grip falls over or drops after bolts or screws
have been removed, there could be accidents.
If you remove door or air vent and leave the interior exposed while moving the
unit, exercise ample caution. Be careful that no foreign objects get inside the
machine, and do not press or hold interior parts or wires. If foreign objects get in,
or if internal parts or wires are damaged, there could be electrical shocks and/or
short circuits.
If the entrance is narrow or low, remove the following parts.
When guard pipe has been removed the base width becomes 1,180 mm. If the rear door and air vent are also
removed, the width becomes 1,170 mm.
When the handgrip is removed, the unit height becomes 1,680 mm.
If the unit still cannot be hauled through the entrance even after parts have been removed, request service from the
office given in this manual or from the point of purchase.
FIG. 7-2a