Sega AFTER BURNER CLIMAX, Owner'S Manual

Page: 102 / 234

10
MONIT
OR
Antistatic sheet is used in the product’s CRT to prevent electrification. To protect this
sheet, observe the following precautions. If the sheet is damaged, the customer
could be electrocuted. There are cases in which sheet edges peel off and turn
white, but this poses no problems in usage.
• Do not contact the antistatic sheet
on the CRT surface, or rub it, with
a hard implement (pointed bar or
pen, etc.).
• Do not affix stickers or anything
e l s e t h a t m i g h t d a m a g e t h e
antistatic sheet on the CRT surface,
or cause the sheet to peel off.
• Do not remove aluminum foils from
the CRT corners. Removing the
aluminum foils can cause static
prevention effects to be lowered.
10- CLEANING THE CRT SURFACES
The antistatic sheet is attached onto the CRT surface. Observe the following
precautions when cleaning. Damage to the antistatic sheet could result in
electrical shock.
• Remove smears by using a dry, soft cloth (flannels, etc.). Do not use a coarse
gauze, etc.
• For smear removing solvent, alcohol (ethanol) is recommended. When using
chemical detergent, be sure to follow instructions below:
- Dilute chemical detergent with water and dip a soft cloth in and then
thoroughly wring it to wipe smears off.
- Do not use a chemical detergent containing an abradant, powder or
bleaching agent.
- Do not use alkaline chemical detergents such as "glass cleaner" available on
the market or solvents such as thinner, etc.
• Do not rub or scratch the CRT face with hard items such as brushes, scrub brush,
etc.
Clean the CRT once a week. Observe the aforesaid precautions in cleaning so as not to damage antistatic sheet on
the CRT surface.