SPX100 SENSOR
DUST EMISSIONS CONTROLLER
Notice Technique
FI 72.0110.0316E
Page 14 sur 27
- If the password is already adjusted, the display shows :
The access to the adjustment can be forbidden by pressing the « right » key (suppress). To
access to the adjustment, you should adjust the password again.
When the « valid » key is pressed, if the password is good, the display shows :
To change the password, press the « right » key, otherwise the « valid » key.
To adjust a new password, select the digit you want to adjust with the « left » and « right »
key, and press the « up » and « down » keys to increase or decrease the selected digit.
Then, press the « valid » key : the new password is activated.
BE CAREFUL
: If you lose the password, all the adjustments stay forbidden (in this
case : consult us).
NOTE : The devices leave our workshops with the password « 0000 », so not protected.
