SPX100 SENSOR
DUST EMISSIONS CONTROLLER
Notice Technique
FI 72.0110.0316E
Page 6 sur 27
III) CONNECTIONS
1) Sensor
The sensor is fitted on the duct or the duct to be monitored:
- Filetage 1" BSP (26-34 GAS)
- Placed on a rectilinear position (5 diameters before / 2 diameters after mini -
N.B. : If stack : 5 diameters after)
- grounded metallic duct (5 meters before the sensor mini). The continuity of earth
between the sensor and the section of casing must be ensured.
- The sensor length must be adjusted to the duct.
