ProLogic L22
Operation Instructions
27
The ProLogic L22 is a digital system and can be paired with any SECURAM safe lock body.
If the lock body that you are pairing the ProLogic L22 with has been paired previously with an analog
system, for example the SafeLogic Basic (or any other SafeLogic Series EntryPad)or was set at the factory
in the default Analog mode, the following Simple Mechanical Reset procedure must be followed:
Step 1: Ensure that the EntryPad is not connected to the lock, and that the battery is not
connected to the EntryPad.
Step 2: Find the reset hole on the back of the lock (under the QC sticker).
Step 3: Using a poke tool, depress the reset button on the back of the lock 3 times. This
discharges any latent energy within the lock’s capacitors.
Step 4: Now the part that requires 3 hands… Depress the reset button and hold it in its
depressed position. While the reset button is depressed, connect the battery to the entrypad.
Step 5: Continue to hold the reset button in its depressed position for another 5 seconds, then
release.
A communication signal has now been sent to the Lock body telling it to convert from analog to
digital mode. The ProLogic will now be able to operate the lock body.
Q: How do you know if the lock has been reset?
