ProLogic L22
Operation Instructions
24
13.0 Recovering the System – Reset to Default
The ProLogic Series safe lock systems have the ability to be reset to factory default settings using a very
unique secure method. Each system has a default recovery code. The Default code is 999999 - this
code can be changed as necessary (refer to the Recovery Code Set selection).
Upon entry of the recovery code, the LCD screen displays an alpha-numeric code. This code cannot be
used to open the safe lock system or to change the code to factory default. The alpha numeric code
must be deciphered using SECURAM’s Authorization Code Generator Software.
The alpha-numeric code is entered into the software together with the encryption code. Through the
software, these codes are deciphered to generate a One Time Use Reset Code.
When entered into the ProLogic safe lock, the lock and EntryPad are reset to factory default and the
system is recovered. Once used, the OTC (One Time Code) is no longer valid.
There is no limit to the number of times a system can be recovered using this process.
This is a vast improvement over other commonly used reset functions, as it offers a very secure recovery
method.
13.1 Recovery Code Set
The default Recovery Code for the ProLogic Series is 999999. It is not necessary to change this code, but
if preferred this code can be changed with the following procedure.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll UP to the menu selection “Recovery Code Set” and Press OK.
Step 5: You will be prompted to enter the existing Recovery Code; Press OK.
