ProLogic L22
Operation Instructions
12
The “Select Menu” message will be displayed as follows:
Step 4: Scroll UP to the menu selection “Delete One User” and Press OK
Step 5: Press OK
Step 6: The system will ask which User Code is to be deleted. Press
and
until the desired
USER ID is reached.
Step 7: Press OK.
This User Code is now deleted from the system.
4.4 Delete All Users
This feature is used to delete all users from the system. Upon executing this command, all users will be
deleted and Manager Code will be reset as follows:
Manager Code (ID01) is 123456
Note: Super Code cannot change, only recovery can do this.
Step1: Press the Menu/OK button
Step 2: Using the
and
, scroll to the System Menu and Press Menu/OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll UP to the menu selection “Delete All Users” and Press OK.
Step 5: The system will request a Confirmation. Press OK.
The system will verify that all User Codes have been deleted.
