ProLogic L22
Operation Instructions
10
Therefore to set to the North American DST, just select “Y” on the first display screen and then accept
the defaults for all other settings by pressing OK.
4.0 Code Management
The ProLogic L22 comes with two default codes:
•
Super Code (ID00) is 111111
•
Manager Code (ID01) is 123456
It is strongly recommended that both these default codes are changed before the lock system is put into
service.
4.1 Enrolling New Users
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press Menu/OK
Step 3: The display will prompt you to enter a valid Administrator code
Enter either the Super Code (ID00) or the Manager Code (ID01). The “Select Menu”
message will be displayed as follows:
Step 4: Scroll
to the menu selection “Enroll New User” and Press OK
Step 5: The next available ID position is displayed. To select this ID, Press OK; or to select a
different ID position, Press
to desired ID and press OK
Step 6: Now enter a 6 digit code
Step 7: Repeat new code
Step 8: System will verify that code has been saved.
